Protocols

Protocols are standardised ways of collecting data. The methodology to follow depends on each study. A country administrator will grant you access if you meet certain criteria. Not all protocols are available in all countries. See which protocols are available in which country at.... and see which criteria at....

You can access to your protocols direcly with the + button. The protocols are linked to the specie list for the taxonomic group considered.

If you have access to protocols, protocol settings will appear at Preferences (see image Protocols as an example), and you will access the protocol through the "Submitting data" menu (see image Protocols. Main menu as an example).

Protocol settings

This section will only appear if you have access to country-specific protocols (see image Protocols).

It is useful for protocols using a special interface with cartography, and allows you to choose the display of letters on the keyboard that you are more comfortable with.

Choose between:

• QWERTZ
• QWERTY
• AZERTY
• ABCD
  
  

Protocols.

Select species list

To enter data in Protocols, you must use the species list from the country the protocol takes place. If your protocol involves more than one taxonomic group, you must select the appropriate list for all taxa involved. For example, if counting birds in Germany under the Waterbird census protocol, your list for birds should be that of Germany. If your protocol involves birds and mammals in France, you should select the french list for both birds and mammals.

To select the appropriate list go to Menu > Tools > Preferences > Species > Choice of species.

See wiki section Mobile interface > Gettig started > Preferences > Species > Choice of species.

Territory mapping

Keyboard settings for mapping

Choose one of the options to select the configuration of your keyboard (see image Keyboard configuration for mapping).

Keyboard configuration for mapping.

Waterbird census

Open the menu as for Submitting records and choose Waterbird census (see image below).

Protocols. Main menu.

NOTE: To activate protocols you are given access to, the list of species you selected in the device must correspond to the list of the local portal that grants you access to the protocol. From the example above (image Protocols. Main menu), the current list of species on the device corresponds to the local partner giving access to Waterbird census, but not to the local partner giving access to the Territory mapping. Therefore, the user could only access Waterbird census until they chnage the list of species. To change the list of species go to Menu > Preferences > Species > Choice of species (wiki section Mobile interface > Getting started > Preferences > Species > Choice of species.

Start of list

Enter general information before starting the protocol (see image). Fields marked with an asterisk are mandatory. Fields available may differ from one country to another. All available fields for all countries are listed below.

Waterbird census. Start of list.

Comment

You may enter a comment if you find it appropiate.

Important changes

Indicate if there have been major changes since your last visit.

Additional observer

Indicate if you are accompanied by someone whose observations are also recorded.

Ice

Indicate the percentatge of water surface that is frozen.

Snow coverage

Indicate the proportion of snow cover.

Count type

Tick roost count if you are counting roosting birds, or during day otherwise.

Count method

Indicate if you are surveying from the ground, the air, the water, a different way, or if it is unknown.

Optical equipment

Indicate which equipment you are using for the survey, if any. Note you can only choose one option.

Coverage

Indicate how much of the designated polygon is covered in the survey.

Water level

Indicate the water level.

Visibility

Indicate the approximate distance within which it is possible to identify species.

Waves

Indicate how are the waves.

Conditions in general

Choose how are surveying conditions overall regarding weather and disturbances, and indicate on next section the reason if surveying conditions are not good.

Reason(s) for moderate / bad conditions

If general conditions indicated above are noot good, click the yellow field to open an expandable menu and choose the reason (see image below). Only one option is possible: choose the one that better adjusts to reality.

Possible reasons for bad surveying conditions.

Count payed

Indicate if the count is payed for or not.

Number of persons on shore

Enter number.

Number of rowing boats

Enter number.

Number of motor boats

Enter number

Number of sailing boats

Enter number

Number of canoes/kayaks

Enter number.

Number of fishing boats

Enter number.

Number of sports divers

Enter number.

Number of surfers

Enter number.

Additional observers

Indicate the name of other observers participating in the data collection.

Important changes since last count?

Indicate if there has been any major change since your previous count, for example, some disturbance like noise or construction.

Record the trace

Check if you want NaturaList to record your track. You will see a reminder to set your GPS on "High precision" and your power saving off for NaturaList. Go to Main menu > Preferences > GPS mode > Continuous (high reactivity) to set the right GPS mode (see wiki sectio Mobile interface > Getting started > Preferences > Location > GPS Mode on how to do it).

After synchronisation, visualise your track at the local portal by:

• Clicking on any species from the list as if for editing, and selecting Go to website > Edit Place tab. See image Example of records that belong to a list.
  
• Logging into the website and going to edit your own data. Click on any observation belonging to the list, and select the Edit place tab. See image Example of records that belong to a list.
  

Hide all records from the public

Check if you want to keep your records privately. This will not prevent administrators to see them and contact you if necessary, but other users of NaturaList will not see your records. Click OK to continue and check if you wish not to see the reminder again. Check O not ask again and keep this choice for future entries if you want to set Record the trace as the default option (see image below). Click OK to continue without seting Record the trace as the default option.

Check to set Record the trace as the default option.

No species were seen

Check if your survey did not provide any data. Surveys with no species are also important results! It will mean you followed the established methodology, and therefore your survey is valid, but no birds were present. They can indicate major population changes and are of extreme importance for conservation purposes.

"My survey did not provide any data" Surveys with no species are also important results! Please submit them. It will mean you followed the established methodology but no birds were present. It can be due to methodology, disturbance, pollution or other major population changes and may be of extreme importance for conservation purposes.

---

Click Validate when done.

Entering records

Enter observations as if in a list in the field.

Place

It opens a map with your polygon to survey (see image below). Place the red marker where the individual, or group of individuals, are observed. Note only observations within the delimited polygon can be recorded. If you have other observations that you would like to report, pause the ongoing protocol (pause icon on top bar, see image) and enter normally as explained in with list in the field.

Waterbird survey. Place.

1. Pause
2. Observation
3. Observer
4. Hide / unhide summary
5. Polygon (notice the thin yellow line delimiting the polygon to survey)

After entering the first record, activate/deactivate (active when orange, inactive when yellow) the summary icon to see species name and associated information from already entered records (see image below). Click on the notebook icon at the bottom to see a list of all records on the ongoing protocol. Know more about the summary of species in a map at wiki section Mobile interface > Navigating the map > Understanding a summary of observations.

Waterbird survey. Summary of observations.

To see how to navigate the map, see wiki section Navigating the map.

The Red Marker indicates the position of your observation. The Smiley indicates your position. When the smiley gets yellow, the GPS has detected your position. Check how accurate the reading is on the top left corner (image Navigating the map). Always check your position on the map. Please place the red marker at your observation, not at your position. Be as accurate as possible.

Species

The list can only contain one taxa. It will be determined by the taxa of the first species you enter unless you indicate the taxa beforehand from the top bar.

Enter species 'by search' or using protocol shortcuts when available, as explained in wiki section Mobile interface > Entering records > Directly in the field > Step 2: Species.

See wiki section Mobile interface > Shortcuts to learn more about shortcuts and how to create them.

Number of individuals

See Mobile interface > Entering records > Directly in the field > Number of individuals if necessary.

Entering records using a counter could be useful for abundant species that are not grouped.

Plus

Enter additional information as if it where a list in the field.

See wiki section Mobile interface > Submitting records > Directly in the field > Step 4: Additional information on how to do it, if necessary.

---

When done, click Save. It will take you to the Place screen to continue entering observations.

Ending the list

To finish the survey, click the stop icon at the top right corner of the Place screen (see image End the list). You will be prompted to confirm (see image Ending the list. Confirmation).

End the list.

Ending the list. Confirmation.

Adjust time, if necessary, and add or modify a comment. Finally, indicate which type of list you recorded (see image below).

Ending the list. Final adjustements.

Time: Adjust starting or ending time by clicking on the time button. See wiki section Mobile interface > Submitting records > Later > Date/Time to know how to modify the clock.

Comment: Add or modify a comment if necessary.

Which species list did you count?:

Restricted list: You counted only the species of interest to the protocol (i.e. ducks).

Extended list: You counted other water-related species besides those required by the protocol (i.e. ducks, herons and kingfishers).

All species where reported (=complete list): You counted all species seen within the polygon (i.e. ducks, herons, kingfishers and passerines).

If the list took more than 30 minutes, you may be prompted to confirm before the list can be saved.

Remember to synchronise your data as soon as possible after entering to avoid loosing it.