Open the menu as for [[Entering_records|'''Submitting records''']] and choose '''Waterbird census''' (see image below). <br />
<br/>
[[File:WBC Menu.png|700px|thumb|center|Waterbird census protocol. Menu.]]<br />
<br />
Choose the site you want to count at as explained in wiki section Mobile interface > Protocols > [[Protocols#Enter_data|Enter data]]. <br/>
<br/>
==WATERBIRD Start of list==
<br />
Enter general information before starting the protocol (see image). Fields marked with an asterisk are mandatory. Fields available may differ from one country to another. Visit wiki section Web interface > Protocols > Preparation and data > Add observations > [[Protocols_web#Starting_the_protocol|Starting the protocol]] for a list of all possible fields. <br />
<br />
[[File:Start of list.png|700px|thumb|center|Waterbird census. Start of list.]]<br />
<br />
:'''Comment''' <br />
You may enter a comment if you find it appropiate. <br />
<br />
:'''Important changes''' <br />
Indicate if there have been major changes since your last visit.<br/>
<br />
:'''Additional observer''' <br />
Indicate if you are accompanied by someone whose observations are also recorded.<br />
<br />
:'''Ice''' <br/>
Indicate the percentatge of water surface that is frozen.<br/>
<br/>
:'''Snow coverage''' <br/>
Indicate the proportion of snow cover.<br/>
<br/>
:'''Count type''' <br />
Tick '''roost count''' if you are counting roosting birds, or '''during day''' otherwise. <br />
<br />
:'''Count method''' <br />
Indicate if you are surveying from the ground, the air, the water, a different way, or if it is unknown. <br />
<br />
:'''Optical equipment''' <br />
Indicate which equipment you are using for the survey, if any. Note you can only choose one option. <br />
<br />
:'''Coverage''' <br />
Indicate how much of the designated polygon is covered in the survey.<br/>
<br />
:'''Water level''' <br />
Indicate the water level. <br />
<br />
:'''Visibility''' <br />
Indicate the approximate distance within which it is possible to identify species. <br />
<br />
:'''Waves''' <br />
Indicate how are the waves.<br/>
<br />
:'''Conditions in general''' <br />
Choose how are surveying conditions overall regarding weather and disturbances, and indicate on next section the reason if surveying conditions are not good. <br />
<br />
:'''Reason(s) for moderate / bad conditions''' <br />
If general conditions indicated above are noot good, click the yellow field to open an expandable menu and choose the reason (see image below). Only one option is possible: choose the one that better adjusts to reality. <br />
<br />
[[File:Bad conditions.png|700px|thumb|center|Possible reasons for bad surveying conditions.]]<br />
<br />
:'''Count payed''' <br/>
Indicate if the count is payed for or not.<br/>
<br/>
:'''Number of persons on shore''' <br/>
Enter number.<br/>
<br/>
:'''Number of rowing boats''' <br/>
Enter number.<br/>
<br/>
:'''Number of motor boats''' <br/>
Enter number<br/>
<br/>
:'''Number of sailing boats''' <br/>
Enter number<br/>
<br/>
:'''Number of canoes/kayaks''' <br/>
Enter number.<br/>
<br/>
:'''Number of fishing boats''' <br/>
Enter number. <br/>
<br/>
:'''Number of sports divers''' <br/>
Enter number.<br/>
<br/>
:'''Number of surfers''' <br/>
Enter number.<br/>
<br/>
:'''Additional observers'''<br />
Indicate the name of other observers participating in the data collection. <br />
<br />
:'''Important changes since last count?''' <br />
Indicate if there has been any major change since your previous count, for example, some disturbance like noise or construction. <br />
<br />
:'''Record the trace''' <br />
Check if you want NaturaList to record your track. <br/>
Visit wiki section Mobile interface > Protocols > Enter data > [[Protocols#Start_of_list|Start of list]] for more information.<br/>
<br/>
:'''Hide all records from the public''' <br />
Check if you want to keep your records privately.<br/>
<br/>
:'''No species were seen''' <br />
Check if your survey did not provide any data. Surveys with no species are also important results! <br/>
<br/>
----
Click '''Next''' when done. <br/>
<br/>
==WATERBIRD Entering records==
<br />
Enter observations as if [[Entering_records#With_a_detailed_list| '''with a detailed list''']]. <br/>
<br/>
:'''Place'''<br/>
Place your observation within the study area. <br/>
<br/>
See wiki section Mobile interface > Protocols > Enter data > Entering observations > [[Protocols#Place|Place]] on how to interpret the map and place your observation.<br/>
<br/>
:'''Species'''<br/>
Enter species ''''by search'''' or using protocol shortcuts when available, as explained in wiki section Mobile interface > Entering records > Directly in the field > [[Entering_records#Step_2:_Species| Step 2: Species]]. <br/>
<br/>
See wiki section Mobile interface > [[Shortcuts|Shortcuts]] to learn more about shortcuts and how to create them.<br/>
<br/>
::'''Number of individuals'''<br/>
Enter number of individuals and precision count. Using the [[Media:20221115Add ind in obs2.png|counter]] function may easy collecting your data.<br/>
<br/>
Visit Mobile interface > Entering records > Directly in the field > [[Entering_records#Number_of_individuals| Number of individuals]] if necessary.<br/>
<br/>
:'''Plus'''<br/>
Enter additional information as if it where a [[Entering_records#With_a_detailed_list| '''with a detailed list''']]. <br/>
<br/>
See wiki section Mobile interface > Submitting records > With a detailed list > [[Entering_records#Step_4_(non_mandatory_fields):_Additional_information| Step 4: Additional information]] on how to do it, if necessary.<br/>
<br/>
----
When done, click '''Save'''. It will take you to the '''Place''' screen to continue entering observations.
<br/>
<br/>
==WATERBIRD Ending the list==
<br/>
To finish the survey, <br/>
<br/>
1. Stop recording, <br/>
2. Adjust time, if necessary, <br/>
3. Fill in/modify details, and <br/>
4. Choose type of list.<br/>
<br/>
:'''Which species list did you count?:''' <br/>
::'''Restricted list:''' You counted only the species of interest to the protocol (i.e. ducks).<br/>
::'''Extended list:''' You counted other water-related species besides those required by the protocol (i.e. ducks, herons and kingfishers).<br/>
::'''All species where reported (=complete list):''' You counted all species seen within the polygon (i.e. ducks, herons, kingfishers and passerines).<br/>
<br/>
Visit wiki section Mobile interface > Enter data > [[Protocols#Ending_the_list|Ending the list]] for details, if necessary.<br/>
<br/>
Remember to [[Entering_records#Synchronisation|synchronise]] your data as soon as possible after entering to avoid loosing it.<br/>
<br/>
==WATERBIRD Editing records and/or protocols==
<br/>
To edit records within a protocol, or to edit the protocol's general parameters, visit wiki section Mobile interface > Editing records > [[Edit_records#Editing_Protocols| Editing protocols]]. <br/>
<br/>
==WATERBIRD Deleting records and/or protocols==
<br/>
To delete records within a protocol, or to delete the whole protocol, visit wiki section Mobile interface > Editing records > [[Edit_records#Deleting_protocols| Deleting protocols]]. <br/>
<br/>
==WATERBIRD Browsing records==
<br/>
See your protocoled records: <br/>
<br/>
:* Before synchronisation <br/>
:: [[Search_observations#In_the_phone|<b>In the phone</b>]]. See more details in wiki section [[Search_observations#Accessing_records'_details|Accesssing records' details]].<br/>
<br/>
:* After synchronisation<br/>
:: In [[Search_observations#Mine|<b>Mine</b>]]. See more details in wiki section [[Search_observations#Accessing_records'_details|Accesssing records' details]].<br/>
:: In [[Search_observations#Under_verification|<b>Under verification</b>]] (only if any data of the protocol needs more information)<br/>
:: In the local portal. Go to the corresponding local portal, Menu > Explore > [[Browsing_records#All_my_observations| All my observations]].<br/>
<br/>
[[#top|[Top to Protocols]]]<br/>
[[Protocols#Waterbird_census|[Top to Waterbird census]]]<br/>
<br/>
=Private territory mapping=
OTHER_MAPPING
<br/>
<br/>
<div class="toc" style="width:300px;"> <!-- La llargada s'ha de canviar aquí -->
Choose the site you want to count at as explained in wiki section Mobile interface > Protocols > [[Protocols#Enter_data|Enter data]]. <br/>
<br/>
==OTHER MAPPING Start of list==
<br/>
Enter general information before starting the count. Fields are protocol dependent and may change from country to country. <br/>
<br/>
Visit wiki section Mobile interface > Protocols > Enter data > [[Protocols#Start_of_list|Start of list]] for details.<br/>
<br/>
----
Click '''Next''' when done. <br/>
<br/>
==OTHER MAPPING Entering records==
<br/>
Screen layout will automatically become horizontal if using a tablet, which the map section on the right, and the species section on the left (see image below).<br/>
Enter observations as if in a [[Entering_records#With_list_in_the_field| '''list in the field''']]. <br/>
:::'''1. Enlarge:''' click to enlarge image. I will hide/unhide general information about your phone on the top line. <br/>
:::'''2. Unlock:''' click on lock icon to unlock screen and be able to enter species. The screens locks automatically to prevent entering unreal data while in the field.<br/>
<br/>
See wiki section Mobile interface > Protocols > Enter data > Entering observations > [[Protocols#Place|Place]] to read and interpret the map. <br/>
:::'''5. Edit:''' Click to go to previous screen and change species name. <br/>
<br/>
:::'''6. Counter:''' Type number of individuls or use quick keys to add or substract individuals. See wiki section ... to know how to use a counter, if necessary.<br/>
<br/>
:::'''7. Atlas code:''' Click on an icon to indicate the main behaviour for individuals registered in this entry.<br/>
[[File:Flight direction NL.jpg|frameless|center|50px]]
</td>
<td>Flying direction. Press, hold and drag to indicate flying direction. If the individual is moving around without a clear direction, press icon but do not indicate flight direction. It will be represented with concentric circles (ie. single male in image below).This information can be combined with others in the list (see example below), but should be introduced first.</td>
</tr>
</table>
</center>
<br/>
[[File:NL flight direction .jpg|thumb|center|500px|Example of Private Territory Mapping with information on flight direction.]]
<br />
<br />
To see how it will show in the web site, visit Web interface > Local portals > Protocols > Private territory mapping > Census results > [[Protocols_web#PTM_Observations_section| Observations section]].
<br/>
<br/>
:::'''Relationship between individuals:''' When two similar individuals are recorded nearby (ie. two singing males of the same species), click on both records to open relationship options (see image below). <br/>
<br/>
[[File:PTM relationship.jpg|700px|thumb|center|Private territory mapping. Relationship between individuals.]]<br/>
<td style="text-align:left">Both sightings correspond to the same individual. It is probably the same territory. It is reflected as a green line in the map.</td>
<td>Both records correspond to different individuals. It may define two different territories. It is reflected as a blue line in the map.</td>
</tr>
</table>
</center>
<br/>
:::Click <br/>
::::'''Save''' to save and continue entering data, or <br/>
::::'''X''' to close panel and continue entering data without indicating relationship. <br/>
<br/>
To see how it will show in the web site, visit Web interface > Local portals > Protocols > Private territory mapping > Census results > [[Protocols_web#PTM_Observations_section| Observations section]].
==OTHER MAPPING Ending the list==
<br/>
To finish the survey, <br/>
<br/>
1. Stop recording, <br/>
2. Adjust time, if necessary, <br/>
3. Fill in/modify details, and <br/>
4. Choose type of list.<br/>
<br/>
:'''Which species list did you count?:''' <br/>
::'''I recorded all species of the programme:''' You counted only the species of interest to the protocol, but you counted them all.<br/>
::'''All species where reported (=complete list):''' You counted all species seen within the polygon.<br/>
<br/>
Visit wiki section Mobile interface > Enter data > [[Protocols#Ending_the_list|Ending the list]] for details, if necessary.<br/>
<br/>
Remember to [[Entering_records#Synchronisation|synchronise]] your data as soon as possible after entering to avoid loosing it.<br/>
<br/>
==OTHER MAPPING Editing records and/or protocols==
<br/>
To edit records within a protocol, or to edit the protocol's general parameters, visit wiki section Mobile interface > Editing records > [[Edit_records#Editing_Protocols| Editing protocols]]. <br/>
<br/>
==OTHER MAPPING Deleting records and/or protocols==
<br/>
To delete records within a protocol, or to delete the whole protocol, visit wiki section Mobile interface > Editing records > [[Edit_records#Deleting_protocols| Deleting protocols]]. <br/>
<br/>
==OTHER MAPPING Browsing records==
<br/>
See your protocoled records: <br/>
<br/>
:* Before synchronisation <br/>
:: [[Search_observations#In_the_phone|<b>In the phone</b>]]. See more details in wiki section [[Search_observations#Accessing_your_own_records|Accessing your own records]].<br/>
<br/>
:* After synchronisation<br/>
:: In [[Search_observations#Mine|<b>Mine</b>]]. See more details in wiki section [[Search_observations#Accessing_records'_details|Accesssing records' details]].<br/>
:: In [[Search_observations#Under_verification|<b>Under verification</b>]] (only if any data of the protocol needs more information)<br/>
:: In the local portal. Go to the corresponding local portal, Menu > Explore > [[Browsing_records#All_my_observations| All my observations]].<br/>
<br/>
[[#top|[Top to Protocols]]]<br/>
[[Protocols#Private_territory_mapping|[Top to Private territory mapping]]]<br/>
<br/>
=Point count=
POINT_COUNT
<br/>
<br/>
<div class="toc" style="width:300px;"> <!-- La llargada s'ha de canviar aquí -->
Choose the site you want to count at as explained in wiki section Mobile interface > Protocols > [[Protocols#Enter_data|Enter data]]. <br/>
<br/>
==POINT_COUNT Start of list==
<br/>
Enter general information before starting the count. Fields are protocol dependent and may change from country to country. <br/>
<br/>
Visit wiki section Mobile interface > Protocols > Enter data > [[Protocols#Start_of_list|Start of list]] for details.<br/>
<br/>
----
Click '''Next''' when done. <br/>
<br/>
==POINT_COUNT Entering records==
<br/>
Enter observations as if in a [[Entering_records#With_a_detailed_list| '''with a detailed list''']]. <br/>
<br/>
:'''Place'''<br/>
Place your observation within the study area. <br/>
<br/>
See wiki section Mobile interface > Protocols > Enter data > Entering observations > [[Protocols#Place|Place]] on how to interpret the map and place your observation.<br/>
<br/>
:'''Species'''<br/>
Enter species and number of individuals. <br/>
<br/>
See wiki section Mobile interface > Protocols > Enter data > Entering observations > [[Protocols#Species|Species]] on how to enter the species name. Use [[Shortcuts|shortcuts]] if necessary.<br/>
<br/>
Visit Mobile interface > Entering records > Directly in the field > [[Entering_records#Number_of_individuals| Number of individuals]] if necessary.<br/>
<br/>
:'''Plus'''<br/>
Enter additional information as if it where a [[Entering_records#With_a_detailed_list| '''with a detailed list''']]. <br/>
<br/>
See wiki section Mobile interface > Submitting records > Directly in the field > [[Entering_records#Step_4_(non_mandatory_fields):_Additional_information| Step 4: Additional information]] on how to do it, if necessary.<br/>
<br/>
----
When done, click '''Save'''. It will take you to the '''Place''' screen to continue entering observations.
<br/>
<br/>
==POINT_COUNT Ending the list==
<br/>
To finish the survey, <br/>
<br/>
1. Stop recording, <br/>
2. Adjust time, if necessary, <br/>
3. Fill in/modify details, and <br/>
4. Choose type of list.<br/>
<br/>
:'''Which species list did you count?:''' <br/>
::'''I recorded all species of the programme:''' You counted only the species of interest to the protocol, but you counted them all.<br/>
::'''All species where reported (=complete list):''' You counted all species seen from the point.<br/>
<br/>
Visit wiki section Mobile interface > Enter data > [[Protocols#Ending_the_list|Ending the list]] for details, if necessary.<br/>
<br/>
Remember to [[Entering_records#Synchronisation|synchronise]] your data as soon as possible after entering to avoid loosing it.<br/>
<br/>
==POINT_COUNT Editing records and/or protocols==
<br/>
To edit records within a protocol, or to edit the protocol's general parameters, visit wiki section Mobile interface > Editing records > [[Edit_records#Editing_Protocols| Editing protocols]]. <br/>
<br/>
==POINT_COUNT Deleting records and/or protocols==
<br/>
To delete records within a protocol, or to delete the whole protocol, visit wiki section Mobile interface > Editing records > [[Edit_records#Deleting_protocols| Deleting protocols]]. <br/>
<br/>
==POINT_COUNT Browsing records==
<br/>
See your protocoled records: <br/>
<br/>
:* Before synchronisation <br/>
:: [[Search_observations#In_the_phone|<b>In the phone</b>]]. See more details in wiki section [[Search_observations#Accessing_your_own_records|Accessing your own records]].<br/>
<br/>
:* After synchronisation<br/>
:: In [[Search_observations#Mine|<b>Mine</b>]]. See more details in wiki section [[Search_observations#Accessing_records'_details|Accesssing records' details]].<br/>
:: In [[Search_observations#Under_verification|<b>Under verification</b>]] (only if any data of the protocol needs more information)<br/>
:: In the local portal. Go to the corresponding local portal, Menu > Explore > [[Browsing_records#All_my_observations| All my observations]].<br/>
<br/>
[[#top|[Top to Protocols]]]<br/>
[[Protocols#Point_count|[Top to Point count]]]<br/>
<br/>
=Woodpeckers=
WOODPECKER
<br/>
<br/>
<div class="toc" style="width:300px;"> <!-- La llargada s'ha de canviar aquí -->
* Enter [[Media:WP Start of list.png|Woodpeckers protocol]]. <br/>
* Choose [[Media:Choice of a protocol site.jpg|the site]] to survey, if more than one. <br/>
* Choose [[Media:Place 1.png|the point]] to count at. <br/>
</ul></p>
</td></tr></table>
</center>
<br />
<br />
====Choose a protocol====
Open the menu as for [[Entering_records|'''Submitting records''']] and choose '''Woodpeckers''' (see image below). <br />
<br/>
[[File:WP Start of list.png|700px|thumb|center|Woodpeckers. Starting the list.]]<br/>
<br/>
====Choose site====
Choose the site you want to count at as explained in wiki section Mobile interface > Protocols > [[Protocols#Enter_data|Enter data]]. <br/>
<br/>
====Choose a point====
Within the protocol, choose the point at which you want to count. A blue dot indicates the one actually activated. By default it will be point 1 and continue in ascending order. Click on any dot to change it. Use googlemaps to get directions to the active point (see image below, number 3). If this is not the first point of the protocol, take off where you left it by either entering as previously described, or by clicking on the yellow reminder at the top (see image ).<br/>
'''2.''' Active point ready to start survey. <br/>
'''3.''' Inactive points points in the survey. <br/>
'''4.''' Get directions to active point.<br/>
</p><br/>
<br/>
==WOODPECKER Start of list==
<br/>
Enter general information before starting the count. Fields are protocol dependent and may change from country to country. <br/>
<br/>
Visit wiki section Mobile interface > Protocols > Enter data > [[Protocols#Start_of_list|Start of list]] for details.<br/>
<br/>
----
Click '''Next''' when done. <br/>
<br/>
==WOODPECKER Entering records==
<br/>
Enter observations as if in a [[Entering_records#With_a_detailed_list| '''with a detailed list''']]. <br/>
<br/>
===WOODPECKER Place===
See wiki section Mobile interface > Protocols > Enter data > Entering observations > [[Protocols#Place|Place]] on how to interpret the map and place your observation.<br/>
[[File:Playback.png|700px|thumb|center|Using the playback tool.]]
<p style="margin-left:220px;margin-right:220px">
<b>10.</b> Play the call of selected species. <br/>
<b>11.</b> Indicates the playback is on. It plays continuously until stopped. It is not possible to enter observations while the playback is playing. Click on icon to stop it.<br/>
<b>12.</b> Close playback tool.<br/>
</p><br/>
===WOODPECKER Species===
See wiki section Mobile interface > Protocols > Enter data > Entering observations > [[Protocols#Species|Species]] on how to enter the species name. Use [[Shortcuts|shortcuts]] if necessary.<br/>
<br/>
===WOODPECKER Plus===
Enter additional information as if it where a [[Entering_records#With_a_detailed_list| '''with a detailed list''']]. <br/>
<br/>
See wiki section Mobile interface > Submitting records > Directly in the field > [[Entering_records#Step_4_(non_mandatory_fields):_Additional_information| Step 4: Additional information]] on how to do it, if necessary.<br/>
<td style="text-align:left> Click on <b>More details</b> to open a special panel (see image below). </td>
</tr>
<table/>
<br/>
[[File:More details.png|300px|thumb|center|Woodpeckers. More details.]]<br />
<p style="margin-left:220px;margin-right:220px">
<b>13. Habitat: </b> Click on the yellow panel to open a clickable menu and select habitat.<br />
<b>14. Specifications: </b> Click on the yellow panel to open a clickable menu and select additional information (ie. behaviour, migration direction, health...).<br />
<b>SAVE</b> Click save when done.<br />
<br />
<br />
----
When done, click '''Save'''. It will take you to the '''Place''' screen to continue entering observations.
<br />
<br />
==WOODPECKER Ending the list==
<br />
To finish the survey, click the stop icon at the top right corner of the '''Place''' screen (see image [[Media:Ending the list.png|End the list]]). You will be prompted to confirm (see image [[Media:Ending the list confirmation.png|Ending the list. Confirmation]]).<br />
<br />
Fill in details, if asked. Be aware that required information is protocol dependent and may change from country to country. <br />
<br />
Note this information applies to the last point you surveyed at. To continue entering observations to other points, go back to step [[Protocols#WP_Start_ of_list|Start of list]] and repeat the process to all points. A yellow notification will appear on top of the main screen, a reminder of an unfinished protocol. Access subsequent points by either clicking on the "+" symbol at the bottom left, or on the reminder at the top.<br/>
<br/>
[[File:WP Next point.png|700px|thumb|center|Woodpeckers. Entering observations in subsequent points.]]<br/>
<br/>
After the second point survey, it will be possible to copy survey details from previous points, except for playback use: <br/>
[[File:Playback use.png|700px|thumb|center|End of list. Playback use.]]
<p style="margin-left:220px;margin-right:220px">
<b>15.</b> Calls used during the survey at this point (in yellow). Click on any of them to mark as used/unused if necessary.<br/>
</p><br/>
<br/>
[[File:Type of list.png|700px|thumb|center|Ending the list. Type of list.]]<br/>
<br/>
:<b>Restricted list:</b> You only recorded <br/>
:::*Lesser Spotted Woodpecker<br/>
:::*Middle Spotted Woodpecker <br/>
:::*Gray Woodpecker <br/>
:::*Black Woodpecker <br/>
:::*Three-toed Woodpecker<br/>
:::*White-backed Wodpecker.<br/>
<br/>
:<b>Extended list:</b> Besides the above, you also recorded<br/>
:::*Green Woodpecker <br/>
:::*Stock Dove<br/>
<br/>
==WOODPECKER Editing records and/or protocols==
<br />
To edit records within a protocol, or to edit the protocol's general parameters, visit wiki section Mobile interface > Editing records > [[Edit_records#Editing_Protocols| Editing protocols]]. <br/>
<br/>
==WOODPECKER Deleting records and/or protocols==
<br />
To delete records within a protocol, or to delete the whole protocol, visit wiki section Mobile interface > Editing records > [[Edit_records#Deleting_protocols| Deleting protocols]]. <br/>
<br/>
==WOODPECKER Browsing records==
<br />
See your protocoled records: <br/>
<br/>
:* Before synchronisation <br/>
:: [[Search_observations#In_the_phone|<b>In the phone</b>]]. See more details in wiki section [[Search_observations#Accessing_your_own_records|Accessing your own records]].<br/>
<br/>
:* After synchronisation<br/>
:: In [[Search_observations#Mine|<b>Mine</b>]]. See more details in wiki section [[Search_observations#Accessing_records'_details|Accesssing records' details]].<br/>
:: In [[Search_observations#Under_verification|<b>Under verification</b>]] (only if any data of the protocol needs more information)<br/>
:: In the local portal. Go to the corresponding local portal, Menu > Explore > [[Browsing_records#All_my_observations| All my observations]].<br/>
<br/>
[[#top|[Top to Protocols]]]<br />
[[Protocols#Woodpeckers|[Top to Woodpeckers]]]<br />
<br />
=Rock Ptarmigans census=
LAGOPUS_MOTA
<br/>
<br/>
<div class="toc" style="width:350px;"> <!-- La llargada s'ha de canviar aquí -->
Choose the site you want to count at as explained in wiki section Mobile interface > Protocols > [[Protocols#Enter_data|Enter data]]. <br/>
<br/>
==LAGOPUS_MOTA Start of list==
<br/>
Enter general information before starting the count. Fields are protocol dependent and may change from country to country. <br/>
<br/>
Visit wiki section Mobile interface > Protocols > Enter data > [[Protocols#Start_of_list|Start of list]] for details.<br/>
<br/>
----
Click '''Next''' when done. <br/>
<br/>
==LAGOPUS_MOTA Entering records==
<br/>
Enter observations as if [[Entering_records#With_a_detailed_list| '''with a detailed list''']]. <br/>
<br/>
:'''Place'''<br/>
Place your observation within the study area. <br/>
<br/>
See wiki section Mobile interface > Protocols > Enter data > Entering observations > [[Protocols#Place|Place]] on how to interpret the map and place your observation.<br/>
<br/>
:'''Number of individuals'''<br/>
Enter number of individuals and precision count. Using the [[Media:20221115Add ind in obs2.png|counter]] function may easy collecting your data.<br/>
<br/>
Visit Mobile interface > Entering records > Directly in the field > [[Entering_records#Number_of_individuals| Number of individuals]] if necessary.<br/>
<br/>
:'''Plus'''<br/>
Enter additional information as if it where a [[Entering_records#With_a_detailed_list| '''with a detailed list''']]. <br/>
<br/>
See wiki section Mobile interface > Submitting records > With a detailed list > [[Entering_records#Step_4_(non_mandatory_fields):_Additional_information| Step 4: Additional information]] on how to do it, if necessary.<br/>
<br/>
----
When done, click '''Save'''. It will take you to the '''Place''' screen to continue entering observations.
<br/>
<br/>
==LAGOPUS_MOTA Ending the list==
<br/>
To finish the survey, <br/>
<br/>
1. Stop recording, <br/>
2. Adjust time, if necessary, <br/>
3. Fill in/modify details, and <br/>
4. Choose type of list.<br/>
<br/>
Visit wiki section Mobile interface > Enter data > [[Protocols#Ending_the_list|Ending the list]] for details, if necessary.<br/>
<br/>
Remember to [[Entering_records#Synchronisation|synchronise]] your data as soon as possible after entering to avoid loosing it.<br/>
<br/>
==LAGOPUS_MOTA Editing records and/or protocols==
<br />
To edit records within a protocol, or to edit the protocol's general parameters, visit wiki section Mobile interface > Editing records > [[Edit_records#Editing_Protocols| Editing protocols]]. <br/>
<br/>
==LAGOPUS_MOTA Deleting records and/or protocols==
<br />
To delete records within a protocol, or to delete the whole protocol, visit wiki section Mobile interface > Editing records > [[Edit_records#Deleting_protocols| Deleting protocols]]. <br/>
<br/>
==LAGOPUS_MOTA Browsing records==
<br />
See your protocoled records: <br/>
<br/>
:* Before synchronisation <br/>
:: [[Search_observations#In_the_phone|<b>In the phone</b>]]. See more details in wiki section [[Search_observations#Accessing_your_own_records|Accessing your own records]].<br/>
<br/>
:* After synchronisation<br/>
:: In [[Search_observations#Mine|<b>Mine</b>]]. See more details in wiki section [[Search_observations#Accessing_records'_details|Accesssing records' details]].<br/>
:: In [[Search_observations#Under_verification|<b>Under verification</b>]] (only if any data of the protocol needs more information)<br/>
:: In the local portal. Go to the corresponding local portal, Menu > Explore > [[Browsing_records#All_my_observations| All my observations]].<br/>
<br/>
[[#top|[Top to Protocols]]]<br />
[[Protocols#Rock Ptarmigans census|[Top to Rock Ptarmigan census]]]<br />
<br />
=Black Grouse census=
TETRAO_TETRIX
<br/>
<br/>
<div class="toc" style="width:300px;"> <!-- La llargada s'ha de canviar aquí -->
Choose the site you want to count at as explained in wiki section Mobile interface > Protocols > [[Protocols#Enter_data|Enter data]]. <br/>
<br/>
==TETRAO_TETRIX Start of list==
<br/>
Enter general information before starting the count. Fields are protocol dependent and may change from country to country. <br/>
<br/>
Visit wiki section Mobile interface > Protocols > Enter data > [[Protocols#Start_of_list|Start of list]] for details.<br/>
<br/>
----
Click '''Next''' when done. <br/>
<br/>
==TETRAO_TETRIX Entering records==
<br/>
Enter observations as if in a [[Entering_records#With_a_detailed_list| '''with a detailed list''']]. <br/>
<br/>
:'''Place'''<br/>
Place your observation within the study area. <br/>
<br/>
See wiki section Mobile interface > Protocols > Enter data > Entering observations > [[Protocols#Place|Place]] on how to interpret the map and place your observation.<br/>
<br/>
:'''Number of individuals'''<br/>
Enter number of individuals and precision count. Using the [[Media:20221115Add ind in obs2.png|counter]] function may easy collecting your data.<br/>
<br/>
Visit Mobile interface > Entering records > With a detailed list > [[Entering_records#Number_of_individuals| Number of individuals]] if necessary.<br/>
<br/>
:'''Plus'''<br/>
Enter additional information as if it where a [[Entering_records#With_a_detailed_list| '''with a detailed list''']]. <br/>
<br/>
See wiki section Mobile interface > Submitting records > With a detailed list > [[Entering_records#Step_4_(non_mandatory_fields):_Additional_information| Step 4: Additional information]] on how to do it, if necessary.<br/>
<br/>
----
When done, click '''Save'''. It will take you to the '''Place''' screen to continue entering observations.
<br/>
<br/>
==TETRAO_TETRIX Ending the list==
<br/>
To finish the survey, <br/>
<br/>
1. Stop recording, <br/>
2. Adjust time, if necessary, <br/>
3. Fill in/modify details, and <br/>
4. Choose type of list.<br/>
<br/>
Visit wiki section Mobile interface > Enter data > [[Protocols#Ending_the_list|Ending the list]] for details, if necessary.<br/>
<br/>
Remember to [[Entering_records#Synchronisation|synchronise]] your data as soon as possible after entering to avoid loosing it.<br/>
<br/>
==TETRAO_TETRIX Editing records and/or protocols==
<br />
To edit records within a protocol, or to edit the protocol's general parameters, visit wiki section Mobile interface > Editing records > [[Edit_records#Editing_Protocols| Editing protocols]]. <br/>
<br/>
==TETRAO_TETRIX Deleting records and/or protocols==
<br />
To delete records within a protocol, or to delete the whole protocol, visit wiki section Mobile interface > Editing records > [[Edit_records#Deleting_protocols| Deleting protocols]]. <br/>
<br/>
==TETRAO_TETRIX Browsing records==
<br />
See your protocoled records: <br/>
<br/>
:* Before synchronisation <br/>
:: [[Search_observations#In_the_phone|<b>In the phone</b>]]. See more details in wiki section [[Search_observations#Accessing_your_own_records|Accessing your own records]].<br/>
<br/>
:* After synchronisation<br/>
:: In [[Search_observations#Mine|<b>Mine</b>]]. See more details in wiki section [[Search_observations#Accessing_records'_details|Accesssing records' details]].<br/>
:: In [[Search_observations#Under_verification|<b>Under verification</b>]] (only if any data of the protocol needs more information)<br/>
:: In the local portal. Go to the corresponding local portal, Menu > Explore > [[Browsing_records#All_my_observations| All my observations]].<br/>
<br/>
[[#top|[Top to Protocols]]]<br />
[[Protocols#Black Grouse census|[Top to Black Grouse census]]]<br />
<br />
=Woodcock monitoring=
WOODCOCK
<br/>
<br/>
<div class="toc" style="width:300px;"> <!-- La llargada s'ha de canviar aquí -->
Choose the site you want to count at as explained in wiki section Mobile interface > Protocols > [[Protocols#Enter_data|Enter data]]. <br/>
<br/>
==WOODCOCK Start of list==
<br/>
Enter general information before starting the count. Fields are protocol dependent and may change from country to country. <br/>
<br/>
Visit wiki section Mobile interface > Protocols > Enter data > [[Protocols#Start_of_list|Start of list]] for details.<br/>
<br/>
----
Click '''Next''' when done. <br/>
<br/>
==WOODCOCK Entering records==
<br/>
Enter observations as if in a [[Entering_records#With_a_detailed_list| '''with a detailed list''']]. <br/>
<br/>
:'''Place'''<br/>
Place your observation within the study area. <br/>
<br/>
See wiki section Mobile interface > Protocols > Enter data > Entering observations > [[Protocols#Place|Place]] on how to interpret the map and place your observation.<br/>
<br/>
:'''Number of individuals'''<br/>
Enter number of individuals and precision count. Using the [[Media:20221115Add ind in obs2.png|counter]] function may easy collecting your data.<br/>
<br/>
Visit Mobile interface > Entering records > With a detailed list > [[Entering_records#Number_of_individuals| Number of individuals]] if necessary.<br/>
<br/>
:'''Plus'''<br/>
Enter additional information as if it where a [[Entering_records#With_a_detailed_list| '''with a detailed list''']]. <br/>
<br/>
See wiki section Mobile interface > Submitting records > With a detailed list > [[Entering_records#Step_4_(non_mandatory_fields):_Additional_information| Step 4: Additional information]] on how to do it, if necessary.<br/>
<br/>
----
When done, click '''Save'''. It will take you to the '''Place''' screen to continue entering observations.
<br/>
<br/>
==WOODCOCK Ending the list==
<br/>
To finish the survey, <br/>
<br/>
1. Stop recording, <br/>
2. Adjust time, if necessary, <br/>
3. Fill in/modify details, and <br/>
4. Choose type of list.<br/>
<br/>
Visit wiki section Mobile interface > Enter data > [[Protocols#Ending_the_list|Ending the list]] for details, if necessary.<br/>
<br/>
Remember to [[Entering_records#Synchronisation|synchronise]] your data as soon as possible after entering to avoid loosing it.<br/>
<br/>
==WOODCOCK Editing records and/or protocols==
<br/>
To edit records within a protocol, or to edit the protocol's general parameters, visit wiki section Mobile interface > Editing records > [[Edit_records#Editing_Protocols| Editing protocols]]. <br/>
<br/>
==WOODCOCK Deleting records and/or protocols==
<br/>
To delete records within a protocol, or to delete the whole protocol, visit wiki section Mobile interface > Editing records > [[Edit_records#Deleting_protocols| Deleting protocols]]. <br/>
<br/>
==WOODCOCK Browsing records==
<br/>
See your protocoled records: <br/>
<br/>
:* Before synchronisation <br/>
:: [[Search_observations#In_the_phone|<b>In the phone</b>]]. See more details in wiki section [[Search_observations#Accessing_your_own_records|Accessing your own records]].<br/>
<br/>
:* After synchronisation<br/>
:: In [[Search_observations#Mine|<b>Mine</b>]]. See more details in wiki section [[Search_observations#Accessing_records'_details|Accesssing records' details]].<br/>
:: In [[Search_observations#Under_verification|<b>Under verification</b>]] (only if any data of the protocol needs more information)<br/>
:: In the local portal. Go to the corresponding local portal, Menu > Explore > [[Browsing_records#All_my_observations| All my observations]].<br/>
<br/>
[[#top|[Top to Protocols]]]<br />
[[Protocols#Woodcock monitoring|[Top to Woodcock monitoring]]]<br />
Protocols are standardised ways of collecting data. The methodology to follow depends on each study. Protocols are only available when a Local Portal supports them. Note not all partners support the same protocols.
To access a protocol, an administrator needs to give you access, and the coordinator of the protocol will give you guidelines on how to conduct the survey. You will be responsible to survey the site assigned to you following the protocol guidelines. However, not all partners give you access automatically to the protocol in NaturaList. While you will always have access to protcols assigned to you through local portals, an administrator will have to grant you access to it through NaturaList in some occasions.
Submit observations.
Access the protocol as if entering non protocoled observations (+ icon at the bottom right corner, see right image). You will have as many entries as the number of protocoled census you are registered for. The ones in white are the ones activated for the species list you choose. The ones in grey are linked to another species list and are not activated until you modify it (see image Protocols. Main menu as an example). Click on the protocol you need.
The list of species selected in your device has to be the one from the country the protocol takes place. If your protocol involves more than one taxonomic group, select the appropriate species list for all taxa involved.
For example, if counting birds in Germany under the Waterbird census protocol, your list for birds should be that of Germany. If your protocol involves birds and mammals in France, you should select the french species list for both birds and mammals.
To select the appropriate list go to Menu > Tools > Preferences > Species > Choice of species.
Keyboard settings for mapping
This section will only appear in Menu > Preferences > Protocols if you have access to country-specific protocols using a tablet interface with cartography:
Breeding Waterbirds
CBBM in Protected areas
Common Breeding Bird Survey
Grey Partridge
Meadow Birds
Reed Breeding Species Census
Semi-Common Territorial Species census
Shorebirds, Anatidae, Grebes and Coots breeding
Private Territory Mapping
Open the menu as for Submitting records and choose Waterbird census (see image below).
Protocols. Main menu.
If you are registered for only one site, you will access directly to the next step: Start of list.
If you have more than one site to survey, it will list all your protocol sites (see image below).
Selecting the protocol site.
1. Sort your protocol site by Site name, National code or Local code.
2. Click on the name to go directly to the next step Start of list.
3. Click on the arrow to get directions to your protocol location. It will open google maps on a new window.
NOTE:
The species list you selected in the device shall be the one of the local portal that grants you access to the protocol.
From the example above (image Protocols. Main menu), the current list of species on the device corresponds to the local partner giving access to Waterbird census (appears in white and is clickable), but not to the local partner giving access to the Territory mapping (appears in grey and is not clickable). To access non active protocols, change the list of species.
To change the list of species go to Menu > Preferences > Species > Choice of species (wiki section Mobile interface > Getting started > Preferences > Species > Choice of species).
Start of list
Enter general information before starting the protocol (see image). Fields marked with an asterisk are mandatory. Fields available are protocol dependent and may differ from one country to another, even within the same protocol. Visit wiki section Web interface > Protocols > Preparation and data > Add observations > Starting the protocol for a list of all possible fields.
Starting the list.
Comment
You may enter a comment if you find it appropiate.
Record the trace
Check if you want NaturaList to record your track. You will see a reminder to set your GPS on "High precision" and your power saving off for NaturaList. Go to Main menu > Preferences > Location > GPS mode > Continuous (high reactivity) to set the right GPS mode (see wiki section Mobile interface > Getting started > Preferences > Location > GPS Mode on how to do it).
Click OK to continue and check if you wish not to see the reminder again. Check Do not ask again and keep this choice for future entries if you want to set Record the trace as the default option (see image below). Click OK to continue without setting Record the trace as the default option.
Check to set Record the trace as the default option.
After synchronisation, visualise your track at the local portal by:
Download your trace after synchronisation as described in Web interface > Export your data > Exporting your trace.
Hide all records from the public
Check if you want to keep your records privately. This will not prevent administrators to see them and contact you if necessary, but other users of NaturaList will not see your records.
No species were seen
Check if your survey did not provide any data. Surveys with no species are also important results! It will mean you followed the established methodology, and therefore your survey is valid, but no birds were present. They can indicate major population changes and are of extreme importance for conservation purposes.
"My survey did not provide any data"
Surveys with no species are also important results! Please submit them. It will mean you followed the established methodology but no birds were present. It can be due to meteorology, disturbance, pollution or other major population changes and may be of extreme importance for conservation purposes.
It opens a map with your position (yellow smiley in the image below). Place the red marker where the individual, or group of individuals, are observed. If you have other observations that you would like to report, pause the ongoing protocol (pause icon on top bar, see image) and enter data as you are used to (all the options as explained in the wiki Mobile interface> Naturalist for Android > Submitting records).
After entering the first record, activate/deactivate (active when orange, inactive when yellow) the summary icon to see species name and associated information from already entered records (see image below). Click on the notebook icon at the bottom to see a list of all records on the ongoing protocol. Know more about the summary of species in a map at wiki section Mobile interface > Navigating the map > Understanding a summary of observations.
The Red Marker indicates the position of your observation. The Smiley indicates your position. When the smiley gets yellow, the GPS has detected your position. Check how accurate the reading is on the top left corner (image Navigating the map). Always check your position on the map. Please place the red marker at your observation, not at your position. Be as accurate as possible.
Species
Enter species 'by search' or using protocol shortcuts when available, as explained in wiki section Mobile interface > Entering records > Directly in the field > Step 2: Species.
See wiki section Mobile interface > Shortcuts to learn more about shortcuts and how to create them.
Number of individuals
Enter number of individuals and precision count.
Visit Mobile interface > Entering records > Directly in the field > Number of individuals if necessary.
Entering records using a counter could be useful for abundant species that are not grouped.
3. Fill in / modify details: Add or modify a comment if necessary, or enter additional information when requested.
4. Choose type of list: Indicate which type of list you recorded. Visit Various > Glossary to know he meaning of each of them, if necessary.
Ending the list. Final adjustments.
2. Adjust tiime 3. Fill in/modify details 4. Choose type of list
Remember to synchronise your data as soon as possible after entering to avoid loosing it.
Editing records and/or protocols
To edit records within a protocol, or to edit the protocol's general parameters, visit wiki section Mobile interface > Editing records > Editing protocols.
Deleting records and/or protocols
To delete records within a protocol, or to delete the whole protocol, visit wiki section Mobile interface > Editing records > Deleting protocols.
