Protocols/es

Los protocolos son formas estandarizadas de recogida de datos. La metodología a seguir depende de cada estudio. Los protocolos solo están disponibles cuando un socio local los ofrece. Ten presente que no todos los socios ofrecen los mismos protocolos.

Para acceder a los protocolos, un administrador tiene que darte acceso, y el coordinador del protocolo te dará las intrucciones para que puedas hacer el censo. Tu responsabilidad es censar en el lugar asignado siguiendo las instrucciones del protocolo. Sin embargo, no todos los socios te dan acceso al protocolo en NaturaList directamente. Mientras que siempre tendrás acceso a los protocolos que se te han asignado en la página local, a veces hace falta que un administrador te de aceso al protocolo en NaturaList.

Enviar observaciones.

Accede al protocolo como si fueras a intriducir observaciones sin protocolo (icono + en la esquina inferior derecha de la imagen, ver imagen de la derecha). Verás tantas entradas como el número de protocolos a los que se te haya dado acceso. Los que aparecen en blanco son los que están activos según la lista de especies elegida. Los que aparecen el gris están asociados a otra lista de especies, inactiva mientras no la modifiques (ver imagen Protocolos. Menú principal como ejemplo). Clica sobre el protocolo que necesitas.

 

 

 

Configuración de protocolos

Antes de empezara entrar observaciones al protocolo, quizás debas definir algunos parámetros:

• Lista de especies
  

Menú > Preferencias > Especies > Lista de especies.

• Parámetros específicos para ciertos protocolos.
  

Menú > Preferencias > Protocolos (ver imagen siguiente).

Protocolos.

Lista de especies

La lista de especies seleccionada en tu dispositivo tiene que ser la misma que la lista de especies del país dónde tiene lugar el censo en tu protocolo. Cuando tu protocolo implica más de un grupo taxonómico, selecciona la lista de especies apropiada para cada uno de los grupos taxonómicos implicados.

Por ejemplo, si cuentas pájaros en Alemania bajo el Censo de aves acuáticas, tu lista de especies deberia ser la lista alemana. Si tu protocolo incluye pájaros y mamíferos en Francia, debes seleccionar al lista de especies de Francia tanto para pájaros como para mamíferos.

Para seleccionar la lista apropiada ves a Menú > Herramientas > Preferenciass > Especies > Lista de especies.

Configuración del teclado para mapas

Esta sección solo aparecerá en Menú > Preferencias > Protocolos si tienes acceso a un protocolo con cartografía desde una tablet:

Censo de aves acuáticas
CBBM in Protected areas
Common Breeding Bird Survey
Grey Partridge
Meadow Birds
Reed Breeding Species Census
Semi-Common Territorial Species census
Shorebirds, Anatidae, Grebes and Coots breeding
Mapeo de territorios

Elige una de las acciones para seleccionar la configuración de tu teclado (ver imagen Keyboard configuration for mapping).

Configuración del teclado para mapas.

Enter data

Open the menu as for Submitting records and choose Waterbird census (see image below).

Protocols. Main menu.

If you are registered for only one site, you will access directly to the next step: Start of list.
If you have more than one site to survey, it will list all your protocol sites (see image below).

Selecting the protocol site.

1. Sort your protocol site by Site name, National code or Local code.

2. Click on the name to go directly to the next step Start of list.

3. Click on the arrow to get directions to your protocol location. It will open google maps on a new window.

Start of list

Enter general information before starting the protocol (see image). Fields marked with an asterisk are mandatory. Fields available are protocol dependent and may differ from one country to another, even within the same protocol. Visit wiki section Web interface > Protocols > Preparation and data > Add observations > Starting the protocol for a list of all possible fields.

Starting the list.

Comment

You may enter a comment if you find it appropiate.

Record the trace

Check if you want NaturaList to record your track. You will see a reminder to set your GPS on "High precision" and your power saving off for NaturaList. Go to Main menu > Preferences > Location > GPS mode > Continuous (high reactivity) to set the right GPS mode (see wiki section Mobile interface > Getting started > Preferences > Location > GPS Mode on how to do it).

Click OK to continue and check if you wish not to see the reminder again. Check Do not ask again and keep this choice for future entries if you want to set Record the trace as the default option (see image below). Click OK to continue without setting Record the trace as the default option.

Check to set Record the trace as the default option.

After synchronisation, visualise your track at the local portal by:

• Clicking on any species from the list as if for editing, and selecting Go to website > Edit Place tab. See image Example of records that belong to a list.
  
• Logging into the website and going to edit your own data. Click on any observation belonging to the list, and select the Edit place tab. See image Example of records that belong to a list.
  

Download your trace after synchronisation as described in Web interface > Export your data > Exporting your trace.

Hide all records from the public

Check if you want to keep your records privately. This will not prevent administrators to see them and contact you if necessary, but other users of NaturaList will not see your records.

No species were seen

Check if your survey did not provide any data. Surveys with no species are also important results! It will mean you followed the established methodology, and therefore your survey is valid, but no birds were present. They can indicate major population changes and are of extreme importance for conservation purposes.

---

Click Next when done.

Entering records

Enter observations as if with a detailed list.

Place

It opens a map with your position (yellow smiley in the image below). Place the red marker where the individual, or group of individuals, are observed. If you have other observations that you would like to report, pause the ongoing protocol (pause icon on top bar, see image) and enter data as you are used to (all the options as explained in the wiki Mobile interface> Naturalist for Android > Submitting records).

Protocol. Place.

1. Pause
2. Observation
3. Observer
4. Hide / unhide summary

After entering the first record, activate/deactivate (active when orange, inactive when yellow) the summary icon to see species name and associated information from already entered records (see image below). Click on the notebook icon at the bottom to see a list of all records on the ongoing protocol. Know more about the summary of species in a map at wiki section Mobile interface > Navigating the map > Understanding a summary of observations.

Protocol. Summary of observations.

To see how to navigate the map, see wiki section Navigating the map.

Species

Enter species 'by search' or using protocol shortcuts when available, as explained in wiki section Mobile interface > Entering records > Directly in the field > Step 2: Species.

See wiki section Mobile interface > Shortcuts to learn more about shortcuts and how to create them.

Number of individuals

Enter number of individuals and precision count.

Visit Mobile interface > Entering records > Directly in the field > Number of individuals if necessary.

Plus

Enter additional information as if with a detailed list.

See wiki section Mobile interface > Submitting records > Directly in the field > Step 4: Additional information on how to do it, if necessary.

---

When done, click Save. It will take you to the Place screen to continue entering observations.

Ending the list

To finish the survey,

1. Stop recording: click the stop icon at the top right corner of the Place screen. You will be prompted to confirm (see image below).

Ending the list.

1.Stop recording

2. Adjust time: If necessary, adjust starting or ending time by clicking on the time button. See wiki section Mobile interface > Submitting records > Later > Date/Time to know how to modify the clock.

3. Fill in / modify details: Add or modify a comment if necessary, or enter additional information when requested.

4. Choose type of list: Indicate which type of list you recorded. Visit Various > Glossary to know he meaning of each of them, if necessary.

Ending the list. Final adjustments.

2. Adjust tiime
3. Fill in/modify details
4. Choose type of list

Remember to synchronise your data as soon as possible after entering to avoid loosing it.

Editing records and/or protocols

To edit records within a protocol, or to edit the protocol's general parameters, visit wiki section Mobile interface > Editing records > Editing protocols.

Deleting records and/or protocols

To delete records within a protocol, or to delete the whole protocol, visit wiki section Mobile interface > Editing records > Deleting protocols.

Browsing records

See your protocolled records:

• Before synchronisation
  

In the phone. See more details in wiki section Accessing your own records.

• After synchronisation
  

In Mine. See more details in wiki section Accessing your own records.

In Under verification (only if any data of the protocol needs more information)

In the local portal. Go to the corresponding local portal, Menu > Explore > All my observations.

[Top]

Waterbird census

WATERBIRD

Open the menu as for Submitting records and choose Waterbird census (see image below).

Waterbird census protocol. Menu.

Choose the site you want to count at as explained in wiki section Mobile interface > Protocols > Enter data.

WATERBIRD Start of list

Enter general information before starting the protocol (see image). Fields marked with an asterisk are mandatory. Fields available may differ from one country to another. Visit wiki section Web interface > Protocols > Preparation and data > Add observations > Starting the protocol for a list of all possible fields.

Waterbird census. Start of list.

Comment

You may enter a comment if you find it appropiate.

Important changes

Indicate if there have been major changes since your last visit.

Additional observer

Indicate if you are accompanied by someone whose observations are also recorded.

Ice

Indicate the percentatge of water surface that is frozen.

Snow coverage

Indicate the proportion of snow cover.

Count type

Tick roost count if you are counting roosting birds, or during day otherwise.

Count method

Indicate if you are surveying from the ground, the air, the water, a different way, or if it is unknown.

Optical equipment

Indicate which equipment you are using for the survey, if any. Note you can only choose one option.

Coverage

Indicate how much of the designated polygon is covered in the survey.

Water level

Indicate the water level.

Visibility

Indicate the approximate distance within which it is possible to identify species.

Waves

Indicate how are the waves.

Conditions in general

Choose how are surveying conditions overall regarding weather and disturbances, and indicate on next section the reason if surveying conditions are not good.

Reason(s) for moderate / bad conditions

If general conditions indicated above are noot good, click the yellow field to open an expandable menu and choose the reason (see image below). Only one option is possible: choose the one that better adjusts to reality.

Possible reasons for bad surveying conditions.

Count payed

Indicate if the count is payed for or not.

Number of persons on shore

Enter number.

Number of rowing boats

Enter number.

Number of motor boats

Enter number

Number of sailing boats

Enter number

Number of canoes/kayaks

Enter number.

Number of fishing boats

Enter number.

Number of sports divers

Enter number.

Number of surfers

Enter number.

Additional observers

Indicate the name of other observers participating in the data collection.

Important changes since last count?

Indicate if there has been any major change since your previous count, for example, some disturbance like noise or construction.

Record the trace

Check if you want NaturaList to record your track.
Visit wiki section Mobile interface > Protocols > Enter data > Start of list for more information.

Hide all records from the public

Check if you want to keep your records privately.

No species were seen

Check if your survey did not provide any data. Surveys with no species are also important results!

---

Click Next when done.

WATERBIRD Entering records

Enter observations as if with a detailed list.

Place

Place your observation within the study area.

See wiki section Mobile interface > Protocols > Enter data > Entering observations > Place on how to interpret the map and place your observation.

Species

Enter species 'by search' or using protocol shortcuts when available, as explained in wiki section Mobile interface > Entering records > Directly in the field > Step 2: Species.

See wiki section Mobile interface > Shortcuts to learn more about shortcuts and how to create them.

Number of individuals

Enter number of individuals and precision count. Using the counter function may easy collecting your data.

Visit Mobile interface > Entering records > Directly in the field > Number of individuals if necessary.

Plus

Enter additional information as if it where a with a detailed list.

See wiki section Mobile interface > Submitting records > With a detailed list > Step 4: Additional information on how to do it, if necessary.

---

When done, click Save. It will take you to the Place screen to continue entering observations.

WATERBIRD Ending the list

To finish the survey,

1. Stop recording,
2. Adjust time, if necessary,
3. Fill in/modify details, and
4. Choose type of list.

Which species list did you count?:

Restricted list: You counted only the species of interest to the protocol (i.e. ducks).

Extended list: You counted other water-related species besides those required by the protocol (i.e. ducks, herons and kingfishers).

All species where reported (=complete list): You counted all species seen within the polygon (i.e. ducks, herons, kingfishers and passerines).

Visit wiki section Mobile interface > Enter data > Ending the list for details, if necessary.

Remember to synchronise your data as soon as possible after entering to avoid loosing it.

WATERBIRD Editing records and/or protocols

To edit records within a protocol, or to edit the protocol's general parameters, visit wiki section Mobile interface > Editing records > Editing protocols.

WATERBIRD Deleting records and/or protocols

To delete records within a protocol, or to delete the whole protocol, visit wiki section Mobile interface > Editing records > Deleting protocols.

WATERBIRD Browsing records

See your protocoled records:

• Before synchronisation
  

In the phone. See more details in wiki section Accesssing records' details.

• After synchronisation
  

In Mine. See more details in wiki section Accesssing records' details.

In Under verification (only if any data of the protocol needs more information)

In the local portal. Go to the corresponding local portal, Menu > Explore > All my observations.

[Top to Protocols]
[Top to Waterbird census]

Private territory mapping

OTHER_MAPPING

Open the menu as for Submitting records and choose Private territory mapping (see image below).

Territory mapping.

Choose the site you want to count at as explained in wiki section Mobile interface > Protocols > Enter data.

OTHER MAPPING Start of list

Enter general information before starting the count. Fields are protocol dependent and may change from country to country.

Visit wiki section Mobile interface > Protocols > Enter data > Start of list for details.

---

Click Next when done.

OTHER MAPPING Entering records

Screen layout will automatically become horizontal if using a tablet, which the map section on the right, and the species section on the left (see image below).
Enter observations as if in a list in the field.

OTHER MAPPING Place

Territory mapping.

1. Enlarge: click to enlarge image. I will hide/unhide general information about your phone on the top line.

2. Unlock: click on lock icon to unlock screen and be able to enter species. The screens locks automatically to prevent entering unreal data while in the field.

See wiki section Mobile interface > Protocols > Enter data > Entering observations > Place to read and interpret the map.

OTHER MAPPING Species

Territory mapping. Species.

3. Shortcuts: Use shortcuts if available or create new ones to ease entering species.

See wiki section Mobile interface > Protocols > Enter data > Entering observations > Species to enter the species name.

OTHER MAPPING Additional information

Enter number of individuals and atlas code.

Territory mapping. Additional information.

4. Species: Registered species.

5. Edit: Click to go to previous screen and change species name.

6. Counter: Type number of individuls or use quick keys to add or substract individuals. See wiki section ... to know how to use a counter, if necessary.

7. Atlas code: Click on an icon to indicate the main behaviour for individuals registered in this entry.

Territory mapping. Atlas code.

	Singing, drumming or displaying male present in breeding season in possible nesting habitat.
	Unidentified individual in breeding season in possible nesting habitat.
	Male in breeding season in possible nesting habitat.
	Female in breeding season in possible nesting habitat.
	Pair observed in suitable nesting habitat in breeding season.
	Agitated behaviour or anxiety calls from adults, indicating a nest or young nearby.
	Recently fledged young (nidicolous species) or downy young (nidifugous species) observed.
	Nest-building or excavating of nest-hole observed.
	Adult carrying faecal sac or food.
	Nest containing eggs or young.
	No atlas code.
	Flying direction. Press, hold and drag to indicate flying direction. If the individual is moving around without a clear direction, press icon but do not indicate flight direction. It will be represented with concentric circles (ie. single male in image below).This information can be combined with others in the list (see example below), but should be introduced first.

Example of Private Territory Mapping with information on flight direction.

To see how it will show in the web site, visit Web interface > Local portals > Protocols > Private territory mapping > Census results > Observations section.

Relationship between individuals: When two similar individuals are recorded nearby (ie. two singing males of the same species), click on both records to open relationship options (see image below).

Private territory mapping. Relationship between individuals.

	Both sightings correspond to the same individual. It is probably the same territory. It is reflected as a green line in the map.
	It is unknown if both records correspond to the same individual/s. It is reflected as an orange line in the map.
	Both records correspond to different individuals. It may define two different territories. It is reflected as a blue line in the map.

Click

Save to save and continue entering data, or

X to close panel and continue entering data without indicating relationship.

To see how it will show in the web site, visit Web interface > Local portals > Protocols > Private territory mapping > Census results > Observations section.

OTHER MAPPING Ending the list

To finish the survey,

1. Stop recording,
2. Adjust time, if necessary,
3. Fill in/modify details, and
4. Choose type of list.

Which species list did you count?:

I recorded all species of the programme: You counted only the species of interest to the protocol, but you counted them all.

All species where reported (=complete list): You counted all species seen within the polygon.

Visit wiki section Mobile interface > Enter data > Ending the list for details, if necessary.

Remember to synchronise your data as soon as possible after entering to avoid loosing it.

OTHER MAPPING Editing records and/or protocols

To edit records within a protocol, or to edit the protocol's general parameters, visit wiki section Mobile interface > Editing records > Editing protocols.

OTHER MAPPING Deleting records and/or protocols

To delete records within a protocol, or to delete the whole protocol, visit wiki section Mobile interface > Editing records > Deleting protocols.

OTHER MAPPING Browsing records

See your protocoled records:

• Before synchronisation
  

In the phone. See more details in wiki section Accessing your own records.

• After synchronisation
  

In Mine. See more details in wiki section Accesssing records' details.

In Under verification (only if any data of the protocol needs more information)

In the local portal. Go to the corresponding local portal, Menu > Explore > All my observations.

[Top to Protocols]
[Top to Private territory mapping]

Point count

POINT_COUNT

Open the menu as for Submitting records and choose Point count (see image below).

Point count. Menu.

Choose the site you want to count at as explained in wiki section Mobile interface > Protocols > Enter data.

POINT_COUNT Start of list

Enter general information before starting the count. Fields are protocol dependent and may change from country to country.

Visit wiki section Mobile interface > Protocols > Enter data > Start of list for details.

---

Click Next when done.

POINT_COUNT Entering records

Enter observations as if in a with a detailed list.

Place

Place your observation within the study area.

See wiki section Mobile interface > Protocols > Enter data > Entering observations > Place on how to interpret the map and place your observation.

Species

Enter species and number of individuals.

See wiki section Mobile interface > Protocols > Enter data > Entering observations > Species on how to enter the species name. Use shortcuts if necessary.

Visit Mobile interface > Entering records > Directly in the field > Number of individuals if necessary.

Plus

Enter additional information as if it where a with a detailed list.

See wiki section Mobile interface > Submitting records > Directly in the field > Step 4: Additional information on how to do it, if necessary.

---

When done, click Save. It will take you to the Place screen to continue entering observations.

POINT_COUNT Ending the list

To finish the survey,

1. Stop recording,
2. Adjust time, if necessary,
3. Fill in/modify details, and
4. Choose type of list.

Which species list did you count?:

I recorded all species of the programme: You counted only the species of interest to the protocol, but you counted them all.

All species where reported (=complete list): You counted all species seen from the point.

Visit wiki section Mobile interface > Enter data > Ending the list for details, if necessary.

Remember to synchronise your data as soon as possible after entering to avoid loosing it.

POINT_COUNT Editing records and/or protocols

To edit records within a protocol, or to edit the protocol's general parameters, visit wiki section Mobile interface > Editing records > Editing protocols.

POINT_COUNT Deleting records and/or protocols

To delete records within a protocol, or to delete the whole protocol, visit wiki section Mobile interface > Editing records > Deleting protocols.

POINT_COUNT Browsing records

See your protocoled records:

• Before synchronisation
  

In the phone. See more details in wiki section Accessing your own records.

• After synchronisation
  

In Mine. See more details in wiki section Accesssing records' details.

In Under verification (only if any data of the protocol needs more information)

In the local portal. Go to the corresponding local portal, Menu > Explore > All my observations.

[Top to Protocols]
[Top to Point count]

Woodpeckers

WOODPECKER

Choose a protocol

Open the menu as for Submitting records and choose Woodpeckers (see image below).

Woodpeckers. Starting the list.

Choose site

Choose the site you want to count at as explained in wiki section Mobile interface > Protocols > Enter data.

Choose a point

Within the protocol, choose the point at which you want to count. A blue dot indicates the one actually activated. By default it will be point 1 and continue in ascending order. Click on any dot to change it. Use googlemaps to get directions to the active point (see image below, number 3). If this is not the first point of the protocol, take off where you left it by either entering as previously described, or by clicking on the yellow reminder at the top (see image ).

Woodpeckers. Selecting survey point.

1. Inactive point already surveyed.
2. Active point ready to start survey.
3. Inactive points points in the survey.
4. Get directions to active point.

WOODPECKER Start of list

Enter general information before starting the count. Fields are protocol dependent and may change from country to country.

Visit wiki section Mobile interface > Protocols > Enter data > Start of list for details.

---

Click Next when done.

WOODPECKER Entering records

Enter observations as if in a with a detailed list.

WOODPECKER Place

See wiki section Mobile interface > Protocols > Enter data > Entering observations > Place on how to interpret the map and place your observation.

Woodpeckers. Count limits.

5. Your position.
6. Your observation.
7. Outer count limit of 300 m radius.
8. Inner count limit of 150 m radius.
9. Open playback tool.

Using the playback tool.

10. Play the call of selected species.
11. Indicates the playback is on. It plays continuously until stopped. It is not possible to enter observations while the playback is playing. Click on icon to stop it.
12. Close playback tool.

WOODPECKER Species

See wiki section Mobile interface > Protocols > Enter data > Entering observations > Species on how to enter the species name. Use shortcuts if necessary.

WOODPECKER Plus

Enter additional information as if it where a with a detailed list.

See wiki section Mobile interface > Submitting records > Directly in the field > Step 4: Additional information on how to do it, if necessary.

Click on More details to open a special panel (see image below).

Woodpeckers. More details.

13. Habitat: Click on the yellow panel to open a clickable menu and select habitat.
14. Specifications: Click on the yellow panel to open a clickable menu and select additional information (ie. behaviour, migration direction, health...).
SAVE Click save when done.

---

When done, click Save. It will take you to the Place screen to continue entering observations.

WOODPECKER Ending the list

To finish the survey, click the stop icon at the top right corner of the Place screen (see image End the list). You will be prompted to confirm (see image Ending the list. Confirmation).

Fill in details, if asked. Be aware that required information is protocol dependent and may change from country to country.

Note this information applies to the last point you surveyed at. To continue entering observations to other points, go back to step Start of list and repeat the process to all points. A yellow notification will appear on top of the main screen, a reminder of an unfinished protocol. Access subsequent points by either clicking on the "+" symbol at the bottom left, or on the reminder at the top.

Woodpeckers. Entering observations in subsequent points.

After the second point survey, it will be possible to copy survey details from previous points, except for playback use:

Woodpeckers. Copy characteristics.

End of list. Playback use.

15. Calls used during the survey at this point (in yellow). Click on any of them to mark as used/unused if necessary.

Ending the list. Type of list.

Restricted list: You only recorded

• Lesser Spotted Woodpecker
  
• Middle Spotted Woodpecker
  
• Gray Woodpecker
  
• Black Woodpecker
  
• Three-toed Woodpecker
  
• White-backed Wodpecker.
  

Extended list: Besides the above, you also recorded

• Green Woodpecker
  
• Stock Dove
  

WOODPECKER Editing records and/or protocols

To edit records within a protocol, or to edit the protocol's general parameters, visit wiki section Mobile interface > Editing records > Editing protocols.

WOODPECKER Deleting records and/or protocols

To delete records within a protocol, or to delete the whole protocol, visit wiki section Mobile interface > Editing records > Deleting protocols.

WOODPECKER Browsing records

See your protocoled records:

• Before synchronisation
  

In the phone. See more details in wiki section Accessing your own records.

• After synchronisation
  

In Mine. See more details in wiki section Accesssing records' details.

In Under verification (only if any data of the protocol needs more information)

In the local portal. Go to the corresponding local portal, Menu > Explore > All my observations.

[Top to Protocols]
[Top to Woodpeckers]

Rock Ptarmigans census

LAGOPUS_MOTA

Open the menu as for Submitting records and choose Point count (see image below).

Choose the site you want to count at as explained in wiki section Mobile interface > Protocols > Enter data.

LAGOPUS_MOTA Start of list

Enter general information before starting the count. Fields are protocol dependent and may change from country to country.

Visit wiki section Mobile interface > Protocols > Enter data > Start of list for details.

---

Click Next when done.

LAGOPUS_MOTA Entering records

Enter observations as if with a detailed list.

Place

Place your observation within the study area.

See wiki section Mobile interface > Protocols > Enter data > Entering observations > Place on how to interpret the map and place your observation.

Number of individuals

Enter number of individuals and precision count. Using the counter function may easy collecting your data.

Visit Mobile interface > Entering records > Directly in the field > Number of individuals if necessary.

Plus

Enter additional information as if it where a with a detailed list.

See wiki section Mobile interface > Submitting records > With a detailed list > Step 4: Additional information on how to do it, if necessary.

---

When done, click Save. It will take you to the Place screen to continue entering observations.

LAGOPUS_MOTA Ending the list

To finish the survey,

1. Stop recording,
2. Adjust time, if necessary,
3. Fill in/modify details, and
4. Choose type of list.

Visit wiki section Mobile interface > Enter data > Ending the list for details, if necessary.

Remember to synchronise your data as soon as possible after entering to avoid loosing it.

LAGOPUS_MOTA Editing records and/or protocols

To edit records within a protocol, or to edit the protocol's general parameters, visit wiki section Mobile interface > Editing records > Editing protocols.

LAGOPUS_MOTA Deleting records and/or protocols

To delete records within a protocol, or to delete the whole protocol, visit wiki section Mobile interface > Editing records > Deleting protocols.

LAGOPUS_MOTA Browsing records

See your protocoled records:

• Before synchronisation
  

In the phone. See more details in wiki section Accessing your own records.

• After synchronisation
  

In Mine. See more details in wiki section Accesssing records' details.

In Under verification (only if any data of the protocol needs more information)

In the local portal. Go to the corresponding local portal, Menu > Explore > All my observations.

[Top to Protocols]
[Top to Rock Ptarmigan census]

Black Grouse census

TETRAO_TETRIX

Open the menu as for Submitting records and choose Point count (see image below).

Choose the site you want to count at as explained in wiki section Mobile interface > Protocols > Enter data.

TETRAO_TETRIX Start of list

Enter general information before starting the count. Fields are protocol dependent and may change from country to country.

Visit wiki section Mobile interface > Protocols > Enter data > Start of list for details.

---

Click Next when done.

TETRAO_TETRIX Entering records

Enter observations as if in a with a detailed list.

Place

Place your observation within the study area.

See wiki section Mobile interface > Protocols > Enter data > Entering observations > Place on how to interpret the map and place your observation.

Number of individuals

Enter number of individuals and precision count. Using the counter function may easy collecting your data.

Visit Mobile interface > Entering records > With a detailed list > Number of individuals if necessary.

Plus

Enter additional information as if it where a with a detailed list.

See wiki section Mobile interface > Submitting records > With a detailed list > Step 4: Additional information on how to do it, if necessary.

---

When done, click Save. It will take you to the Place screen to continue entering observations.

TETRAO_TETRIX Ending the list

To finish the survey,

1. Stop recording,
2. Adjust time, if necessary,
3. Fill in/modify details, and
4. Choose type of list.

Visit wiki section Mobile interface > Enter data > Ending the list for details, if necessary.

Remember to synchronise your data as soon as possible after entering to avoid loosing it.

TETRAO_TETRIX Editing records and/or protocols

To edit records within a protocol, or to edit the protocol's general parameters, visit wiki section Mobile interface > Editing records > Editing protocols.

TETRAO_TETRIX Deleting records and/or protocols

To delete records within a protocol, or to delete the whole protocol, visit wiki section Mobile interface > Editing records > Deleting protocols.

TETRAO_TETRIX Browsing records

See your protocoled records:

• Before synchronisation
  

In the phone. See more details in wiki section Accessing your own records.

• After synchronisation
  

In Mine. See more details in wiki section Accesssing records' details.

In Under verification (only if any data of the protocol needs more information)

In the local portal. Go to the corresponding local portal, Menu > Explore > All my observations.

[Top to Protocols]
[Top to Black Grouse census]

Woodcock monitoring

WOODCOCK

Open the menu as for Submitting records and choose Point count (see image below).

Choose the site you want to count at as explained in wiki section Mobile interface > Protocols > Enter data.

WOODCOCK Start of list

Enter general information before starting the count. Fields are protocol dependent and may change from country to country.

Visit wiki section Mobile interface > Protocols > Enter data > Start of list for details.

---

Click Next when done.

WOODCOCK Entering records

Enter observations as if in a with a detailed list.

Place

Place your observation within the study area.

See wiki section Mobile interface > Protocols > Enter data > Entering observations > Place on how to interpret the map and place your observation.

Number of individuals

Enter number of individuals and precision count. Using the counter function may easy collecting your data.

Visit Mobile interface > Entering records > With a detailed list > Number of individuals if necessary.

Plus

Enter additional information as if it where a with a detailed list.

See wiki section Mobile interface > Submitting records > With a detailed list > Step 4: Additional information on how to do it, if necessary.

---

When done, click Save. It will take you to the Place screen to continue entering observations.

WOODCOCK Ending the list

To finish the survey,

1. Stop recording,
2. Adjust time, if necessary,
3. Fill in/modify details, and
4. Choose type of list.

Visit wiki section Mobile interface > Enter data > Ending the list for details, if necessary.

Remember to synchronise your data as soon as possible after entering to avoid loosing it.

WOODCOCK Editing records and/or protocols

To edit records within a protocol, or to edit the protocol's general parameters, visit wiki section Mobile interface > Editing records > Editing protocols.

WOODCOCK Deleting records and/or protocols

To delete records within a protocol, or to delete the whole protocol, visit wiki section Mobile interface > Editing records > Deleting protocols.

WOODCOCK Browsing records

See your protocoled records:

• Before synchronisation
  

In the phone. See more details in wiki section Accessing your own records.

• After synchronisation
  

In Mine. See more details in wiki section Accesssing records' details.

In Under verification (only if any data of the protocol needs more information)

In the local portal. Go to the corresponding local portal, Menu > Explore > All my observations.

[Top to Protocols]
[Top to Woodcock monitoring]